Manufacturing Water Filtration Systems
Manufacturing water filtration removes particulates from incoming plant water, equipment wash water, cooling loops, and reuse systems so pumps, sprays, and production equipment stay protected.
Yardney Maxi Flush screen filters and skid-mounted media filters provide backwash filtration for plant and process water.
Manufacturing sites use water for equipment wash, cooling loops, and reuse systems, and incoming plant water can carry solids that damage pumps, clog sprays, and reduce throughput. Spray nozzles, cooling passages, and precision components are especially sensitive.
Controlling particulates early and continuously protects production equipment, reduces maintenance disruptions, and improves water reuse potential. Solids that cause plugging, abrasion, and scaling lead to shutdowns and uneven performance, so filtration supports more predictable results across varying production loads.
Protect Production Equipment: Remove particulates that clog sprays and wear pumps.
Reduce Downtime: Fewer plugged nozzles and fouled components mean fewer shutdowns.
Support Stable Quality: Keep water quality steady across shifts and production loads.
Improve Reuse Potential: Cleaner wash and process water gives reuse systems more to work with.
Yardney Maxi Flush automatic backwash screen filters give manufacturing plants high-rate filtration for industrial process water, incoming plant water, wastewater clean-up, and industrial water for plant reuse. The field-changeable stainless steel cartridge is built with burst strength in excess of 400 psi.
Fine mesh filtration reaches 200 mesh (75 microns), with cartridges from 40 to 200 mesh, at flows from 250 gpm and up. Where flows are smaller or finer filtration is needed, Yardney sand media and multi media filters start at 10 gpm.
Applications
Standard Assembly Includes
Available Options
Filtration removes particulates, not dissolved minerals. Where scale or microbial growth is a concern, pair filtration with the water treatment program for that system.
Maxi Flush Screen: down to 75 microns, 40 to 200 mesh cartridges, flows from 250 gpm, automatic backwash
Sand Media: organic and inorganic suspended solids down to 20 microns; flows from 10 gpm; backwash runs one tank at a time
Multi Media: organic and inorganic suspended solids down to 5 microns; backwash starts automatically by elapsed time or pressure differential
It removes suspended particulates from the water a plant uses for equipment wash, cooling loops, and reuse, so pumps, sprays, and production equipment stay protected.
Common points are incoming plant water, equipment wash water, cooling loops, and reuse systems. The right point depends on which equipment needs protection.
Match the filter to the water: Maxi Flush screens for higher flows and fine mesh down to 75 microns, sand media filters down to 20 microns, and Multi Media down to 5. Send Yardney your flow and solids data for a recommendation.
Yardney lists industrial water for plant reuse as an application for its media and screen filters. The water quality you need depends on the process you are feeding.
Filtration removes suspended particulates that contribute to plugging and abrasion. It does not remove dissolved minerals, so scale control still needs water treatment designed for your system.
